Wednesday, November 19, 2014

Carbohydrate conversion

Digestion of carbohydrate by gycosidase - an SN1 reaction
A very important example of a nucleophilic substitution reaction that is thought to occur though a two-step, dissociative (SN1) mechanism is the hydrolytic breakdown of carbohydrates. In chapter 11 we will focus on these reactions and learn that the terms ’hemiacetal’, ’acetal’, ’hemiketal’, and ’ketal’ are used to describe the different patterns of bonding that we are seeing here - but for now, we will just look at the reaction from the standpoint of the SN1 mechanism that we learned about in chapter 8.
You probably know that carbohydrates, (also called oligosaccharides), are sugar polymers. Cellulose, the tough, fibrous material in plants, is one of the most abundant organic compounds found in nature. It is basically a long chain of glucose molecules linked together:


The bonds connecting individual sugar units in carbohydrate chains are called glycosidic bonds, and enzymes that break them are called glycosidases. Humans do not have glycosidases capable of breaking the glycosidic bonds in cellulose - and thus we cannot use cellulose a source of energy - but cellulose is nonetheless necessary to us as dietary fiber. Cows and other ruminants are able to derive energy from cellulose because they maintain bacteria in their digestive tract which possess the proper glycosidase enzymes.
Starch, the carbohydrate that we eat in bread and pasta, is also a long chain of glucose molecules. However, the glycosidic bonds linking the individual glucose units in starch have a different stereochemical configuration from those in cellulose, and humans do have the proper glycosidase enzymes to digest starch. We will discuss carbohydrates again in chapter 11, and you will learn many more details if you take a course in biochemistry.
We focus now on the chemistry by which glycosidic bonds are broken and formed. Enzymes called glycosidases catalyze these reactions. Consider for example the following reaction, catalyzed by a bacterial enzyme, in which the glycosidic bond between two glucose molecules in cellulose is cleaved.


This is a hydrolysis reaction – recall that this term is used to describe any reaction where a bond is being broken by water. If you look carefully, you will recognize that this reaction is simply a nucleophilic substitution at the carbon indicated by the arrow: water is the nucleophile, and the leaving group is an alcohol, specifically the glucose molecule on the right side. In the next few figures, the leaving group will be referred to as ’HO-R’ for simplicity.
(A quick note on hydrolysis reactions: we will see many more examples of hydrolysis reactions throughout our study of organic chemistry. In eukaryotic cells, many hydrolysis reactions occur in the acidic (pH  4.5) environment of the lysosome, an organelle that specializes in breaking large molecules down into small ones.)
Evidence suggests that glycosidase reactions probably occur through an SN1 mechanism, implying the formation of a short-lived cationic intermediate. Here is the first, rate-determining step:


Notice that the positively charged carbon on the intermediate is adjacent to an oxygen. Recall from previous discussions (section 8.4B) that oxygen can act as a powerful electron donating group because of the resonance effect of its lone pairs. This is best illustrated by drawing a second resonance contributor, in which the positive charge is placed on the oxygen. This intermediate is generally referred to as an oxonium ion.
The active site of the enzyme has two aspartate residues, one positioned above the substrate (Asp1) and one below (Asp2). The leaving group is protonated by Asp1: protonation, as you recall, creates a better leaving group.
Here is the second step of the glycosidase mechanism:


This is because the leaving group remains bound in the active site after the formation of the oxonium ion intermediate, and blocks the bottom side of the electrophilic carbon from attack. The water nucleophile, as it attacks from the bottom side, is deprotonated by Asp2.
Because the reaction results in inversion of configuration, the enzyme is called an inverting glycosidase.
Researchers have also identified retaining glycosidases, which catalyze similar hydrolysis reactions except with retention of configuration:


The active site architectures of the inverting and retaining glycosidases are actually very similar: both have two aspartate residues positioned above and below the electrophilic carbon. The first step in the retaining mechanism is the same as in the inverting mechanism: formation of the oxonium intermediate.


In the retaining reaction, however, the bottom side aspartate (Asp2) acts as a nucleophile instead of as a base (step 2 below) , attacking the electrophilic carbon directly and forming what is referred to as acovalent intermediate (the enzyme is covalently attached to the terminal glucose molecule via the aspartate residue).


In the meantime, ROH (the other section of the celluose chain) diffuses away from the active site. The substrate-enzyme linkage then breaks (step 3), resulting in formation of the same oxonium ion intermediate as before. A nucleophilic water molecule then attacks from the top side, as Asp1 serves as a catalytic base (step 4).


What has occurred here is known as a double displacement mechanism: in order to achieve substitution with retention of configuration, two nucleophilic substitutions have occurred in a row, each with inversion of stereochemistry. The overall result of two successive inversions at the same stereocenter is, of course, retention.
It is important to remember that the stereospecificity observed in the two examples of SN1 reactions above is due to the exquisite control that enzymes have over the reactionsthey catalyze. Nucleophiles and electrophiles are bound in precise locations so that nucleophilic attack can occur from one side and one side only. While concerted SN2 displacements take place specifically with inversion of configuration in both enzymatic and non-enzymatic situations, remember (section 8.2B) that nonenzymatic SN1 reactions generally result in racemization. Recall also the reasoning behind this: with no enzymatic control, the nucleophile can attack the planar, sp2-hybridized carbocation intermediate from either side with equal probability, resulting an a racemic mixture of both the R and S product.
Attribution

Mashing and Lautering

Mashing
Interior view of a mash tun in a Scotch whisky distillery, showing the stirring mechanism.
In brewing and distilling, mashing is the process of combining a mix of milled grain (typically maltedbarley with supplementary grains), known as the "grain bill", and water, known as "liquor", and heating this mixture. Mashing allows the enzymes in the malt to break down the starch in the grain into sugars, typically maltose to create a malty liquid called wort.1 There are two main methods—infusion mashing, in which the grains are heated in one vessel; and decoction mashing, in which a proportion of the grains are boiled and then returned to the mash, raising the temperature.2Mashing involves pauses at certain temperatures (notably 45 °C, 62 °C and 73 °C) [113°F, 144°F, and 163°F], and takes place in a "mash tun"—an insulated brewing vessel with a false bottom.3 4 5 The end product of mashing is called a "mash".
Infusion mashing
Most breweries use infusion mashing, in which the mash is heated directly to go from rest temperature to rest temperature. Some infusion mashes achieve temperature changes by adding hot water, and there are also breweries that do single-step infusion, performing only one rest beforelautering.
Decoction mashing
Decoction mashing is where a proportion of the grains are boiled and then returned to the mash, raising the temperature. The boiling extracts more starch from the grain by breaking down the cell walls of the grain. It can be classified into one-, two-, and three-step decoctions, depending on how many times part of the mash is drawn off to be boiled.6 It is a traditional method, and is common in German and Central European breweries.7 8 It was used out of necessity before the invention ofthermometers allowed simpler step mashing. But the practice continues for many traditional beersbecause of the unique malty flavor it lends to the beer; boiling part of the grain results in Maillard reactions, which create melanoidins that lead to rich, malty flavors.9
Mash tun
An empty mash tun showing the integrated mash rake.
In large breweries, in which optimal utilization of the brewery equipment is economically necessary, there is at least one dedicated vessel for mashing. In decoction processes, there must be at least two. The vessel has a good stirring mechanism, a mash rake, to keep the temperature of the mash uniform, and a heating device that is efficient, but will not scorch the malt (often steam), and should be insulated to maintain rest temperatures for up to one hour. A spray ball for clean-in-place (CIP) operation should also be included for periodic deep cleaning. Sanitation is not a major concern before wort boiling, so a rinse-down should be all that is necessary between batches. Smaller breweries will often use a boil kettle for mashing.
Each particular ingredient has its own flavor that contributes to the final character of the beverage. In addition, different ingredients carry other characteristics, not directly relating to the flavor, which may dictate some of the choices made in brewing: nitrogen content, diastatic power, color, modification, and conversion.
Nitrogen content
The nitrogen content of a grain refers to the mass fraction of the grain that is made up of protein, and is usually expressed as a percentage; this fraction is further refined by distinguishing what fraction of the protein is water-soluble, also usually expressed as a percentage; 40% is typical for most beermaking grains. Generally, brewers favor lower-nitrogen grains, while distillers favor high-nitrogen grains.
In most beermaking, an average nitrogen content in the grains of at most 10% is sought; higher protein content, especially the presence of high-mass proteins, causes "chill haze", a cloudy visual quality to the beer. However, this is mostly a cosmetic desire dating from the mass production ofglassware for presenting serving beverages; traditional styles such as sahti, saison, and bière de garde, as well as several Belgian styles, make no special effort to create a clear product. The quantity of high-mass proteins can be reduced during the mash by making use of a protease rest.
In Britain, preferred brewers’ grains are often obtained from winter harvests and grown in low-nitrogen soil; in central Europe, no special changes are made for the grain-growing conditions and multi-step decoction mashing is favored instead.
Diastatic power
The diastatic power (DP), also called the "diastatic activity" or "enzymatic power", of a grain in general refers only to malts, grains that have begun to germinate; the act of germination includes the production of a number of enzymes such as amylase that convert starch into sugar; thereby, sugars can be extracted from the barley’s own starches simply by soaking the grain in water at a controlled temperature: this is mashing. Other enzymes break long proteins into short ones and accomplish other important tasks.
In general, the hotter a grain is kilned, the less its diastatic activity; as a consequence, only lightly colored grains can be used as base malts, with Munich malt being the darkest base malt generally available.
Diastatic activity can also be provided by diastatic malt extract or by inclusion of separately-prepared brewing enzymes.
Diastatic power for a grain is measured in degrees Lintner (°Lintner or °L, although the latter can conflict with the symbol °L for Lovibond color); or in Europe by Windisch-Kolbach units (°WK). A malt with enough power to self-convert has a diastatic power near 35 °Lintner (94 °WK). Until recently the most active, so-called "hottest" malts currently available, American six-row pale barley malts, have a diastatic power of up to 160 °Lintner (544 °WK). Wheat malts have begun to appear on the market with diastatic power of up to 200 °Lintner. Although with the huskless wheat being somewhat difficult to work with, this is usually used in conjunction with barley, or as an addition to add high diastatic power to a mash.
Color
In brewing, the color of a grain or product is evaluated by the Standard Reference Method (SRM),Lovibond (°L), American Society of Brewing Chemists (ASBC) or European Brewery Convention (EBC) standards. While SRM and ASBC originate in North America and EBC in Europe, all three systems can be found in use throughout the world; degrees Lovibond has fallen out of industry use but has remained in use in homebrewing circles as the easiest to implement without a spectrophotometer. The darkness of grains range from as light as 3 SRM/5 EBC for Pilsener malt to as dark as 700 SRM/1600 EBC for black malt and roasted barley.
Modification
The quality of starches in a grain is variable with the strain of grain used and its growing conditions. "Modification" refers specifically to the extent to which starch molecules in the grain consist of simple chains of starch molecules versus branched chains; a fully modified grain contains only simple-chain starch molecules. A grain that is not fully modified requires mashing in multiple steps rather than at simply one temperature as the starches must be de-branched before amylase can work on them. One indicator of the degree of modification of a grain is that grain’s Nitrogen ratio; that is, the amount of soluble Nitrogen (or protein) in a grain vs. the total amount of Nitrogen(or protein). This number is also referred to as the "Kolbach Index" and a malt with a Kolbach index between 36% and 42% is considered a malt that is highly modified and suitable for single infusion mashing. Maltsters use the length of the acrospire vs. the length of the grain to determine when the appropriate degree of modification has been reached before drying or kilning.
Conversion
Conversion is the extent to which starches in the grain have been enzymatically broken down into sugars. A caramel or crystal malt is fully converted before it goes into the mash; most malted grains have little conversion; unmalted grains, meanwhile, have little or no conversion. Unconverted starch becomes sugar during the last steps of mashing, through the action of alpha and beta amylases.
Grain milling
The grain used for making beer must first be milled. Milling increases the surface area of the grain, making the starch more accessible, and separates the seed from the husk. Care must be taken when milling to ensure that the starch reserves are sufficiently milled without damaging the husk and providing coarse enough grits that a good filter bed can be formed during lautering.
Grains are typically dry-milled. Dry mills come in four varieties: two-, four-, five-, and six-roller mills. Hammer mills, which produce a very fine mash, are often used when mash filters are going to be employed in the Lautering process because the grain does not have to form its own filterbed. In modern plants, the grain is often conditioned with water before it is milled to make the husk more pliable, thus reducing breakage and improving lauter speed.
Mashing-in
Mixing of the strike water, water used for mashing in, and milled grist must be done in a such a way as to minimize clumping and oxygen uptake. This was traditionally done by first adding water to the mash vessel, and then introducing the grist from the top of the vessel in a thin stream. This has led to a lot of oxygen absorption, and loss of flour dust to the surrounding air. A premasher, which mixes the grist with mash-in temperature water while it is still in the delivery tube, reduces oxygen uptake and prevents dust from being lost.
Mashing in (sometimes called "doughing-in") is typically done between 35 and 45 °C (95 and 113 °F), but, for single-step infusion mashes, mashing in must be done between 62-67 °C (144-153 °F) for amylases to break down the grain’s starch into sugars. The weight-to-weight ratio of strike water and grain varies from 1⁄2 for dark beers in single-step infusions to 1⁄4 or even 1⁄5, ratios more suitable for light-colored beers and decoction mashing, where much mash water is boiled off.
Enzymatic rests
Optimal rest temperatures for major mashing enzymes
Temp °C
Temp °F
Enzyme
Breaks down
40-45 °C
104.0-113.0 °F
β-Glucanase
β-Glucan
50-54 °C
122.0-129.2 °F
Protease
Protein
62-67 °C
143.6-152.6 °F
β-Amylase
Starch
71-72 °C
159.8-161.6 °F
α-Amylase
Starch
In step-infusion and decoction mashing, the mash is heated to different temperatures at which specific enzymes work optimally. The table at right shows the optimal temperature ranges for the enzymes brewers pay the most attention to and what material those enzymes break down. There is some contention in the brewing industry as to just what the optimal temperature is for these enzymes, as it is often very dependent on the pH of the mash, and its thickness. A thicker mash acts as a buffer for the enzymes. Once a step is passed, the enzymes active in that step are denatured by the increasing heat and become permanently inactive. The time spent transitioning between rests is preferably as short as possible; however, if the temperature is raised more than 1 °C per minute, enzymes may be prematurely denatured in the transition layer near heating elements.
β-Glucanase rest
β-glucan is a general term for polysaccharides, such as cellulose, made up of chains of glucosemolecules connected by beta glycosidic bonds, as opposed to alpha glycosidic bonds in starch. These are a major constituent of the cell wall of plants, and make up a large part of the bran in grains. A β-glucanase rest done at 40 °C (104 °F) is practiced in order to break down cell walls and make starches more available, thus raising the extraction efficiency. Should the brewer let this rest go on too long, it is possible that a large amount of β-glucan will dissolve into the mash, which can lead to a stuck mash on brew day, and cause filtration problems later in beer production.
Protease rest
Protein degradation via a proteolytic rest plays many roles: production of free-amino nitrogen (FAN) for yeast nutrition, freeing of small proteins from larger proteins for foam stability in the finished product, and reduction of haze-causing proteins for easier filtration and increased beer clarity. In all-malt beers, the malt already provides enough protein for good head retention, and the brewer needs to worry more about more FAN being produced than the yeast can metabolize, leading to off flavors. The haze causing proteins are also more prevalent in all-malt beers, and the brewer must strike a balance between breaking down these proteins, and limiting FAN production.
Amylase rests
The amylase rests are responsible for the production of free fermentable and nonfermentable sugar from starch in a mash.
Starch is an enormous molecule made up of branching chains of glucose molecules. β-amylase breaks down these chains from the end molecules forming links of two glucose molecules, i.e.maltose. β-amylase cannot break down the branch points, although some help is found here through low α-amylase activity and enzymes such as limit dextrinase. The maltose will be the yeast’s main food source during fermentation. During this rest starches also cluster together forming visible bodies in the mash. This clustering eases the lautering process.
The α-amylase rest is also known as the saccharification rest, because during this rest the α-amylase breaks down the starches from the inside, and starts cutting off links of glucose one to four glucose molecules in length. The longer glucose chains, sometimes called dextrins or maltodextrins, along with the remaining branched chains, give body and fullness to the beer.
Because of the closeness in temperatures of peak activity of α-amylase and β-amylase, the two rests are often performed at once, with the time and temperature of the rest determining the ratio of fermentable to nonfermentable sugars in the wort and hence the final sweetness of the fermented drink; a hotter rest gives a fuller-bodied, sweeter beer as α-amylase produces more unfermentable sugars. 66 °C (151 °F) is a typical rest temperature for a pale ale or German pilsener, while Bohemian pilsener and mild ale are rested more typically at 67-68 °C (153-154 °F).
Decoction "rests"
In decoction mashing, part of the mash is taken out of the mash tun and placed in a cooker, where it is boiled for a period of time. This caramelizes some of the sugars, giving the beer a deeper flavor and color, and frees more starches from the grain, making for a more efficient extraction from the grains. The portion drawn off for decoction is calculated so that the next rest temperature is reached by simply putting the boiled portion back into the mash tun. Before drawing off for decoction, the mash is allowed to settle a bit, and the thicker part is typically taken out for decoction, as the enzymes have dissolved in the liquid, and the starches to be freed are in the grains, not the liquid. This thick mash is then boiled for around 15 minutes, and returned to the mash tun.
The mash cooker used in decoction should not be allowed to scorch the mash, but maintaining a uniform temperature in the mash is not a priority. To prevent a scorching of the grains, the brewer must continuously stir the decoction and apply a slow heating.
A decoction mash brings out a higher malt profile from the grains and is typically used in Bocks orDoppelbock-style beers.
Mash-out
After the enzyme rests, the mash is raised to its mash-out temperature. This frees up about 2% more starch, and makes the mash less viscous, allowing the lauter to process faster. Although mash temperature and viscosity are roughly inversely proportional, the ability of brewers and distillers to use this relationship is constrained by the fact that α-Amylase quickly denatures above 78 °C (172.4 °F). Any starches extracted once the mash is brought above this temperature cannot be broken down, and will cause a starch haze in the finished product, or in larger quantities an unpleasantly harsh flavor can develop. Therefore, the mash-out temperature rarely exceeds 78 °C (172.4 °F).
If the lauter tun is a separate vessel from the mash tun, the mash is transferred to the lauter tun at this time. If the brewery has a combination mash-lauter tun, the agitator is stopped after mash-out temperature is reached and the mash has mixed enough to ensure a uniform temperature.
Lautering
Lautering is a process in brewing beer in which the mash is separated into the clear liquid wort and the residual grain. Lautering usually consists of 3 steps: mashout, recirculation, and sparging.
Recirculation
Recirculation consists of drawing off wort from the bottom of the mash, and adding it to the top. Lauter tuns typically have slotted bottoms to assist in the filtration process. The mash itself functions much as a sand filter to capture mash debris and proteins. This step is monitored by use of aturbidimeter to measure solids in the wort liquid by their opacity.
Sparging
Sparging is trickling water through the grain to extract sugars. This is a delicate step, as the wrong temperature or pH will extract tannins from the chaff (grain husks) as well, resulting in a bitter brew. Typically, 50% less water is used for sparging than was originally used for mashing. Sparging is typically conducted in a lauter tun.10
English sparging (or batch sparging) drains the wort completely from the mash, after which more water is added, held for a while at 76 °C and then drained again. The second draining can be used in making a lighter-bodied low-alcohol beer known as small beer, or can be added to the first draining.
Fly sparging (or German sparging), which is used by commercial breweries uses continuous process sparging. When the wort reaches a desired level (typically about an inch) above the grainbed, water is added at the same slow rate that wort is being drained. The wort gradually becomes weaker and weaker, and at a certain point, they stop adding water. This results in greater yields.
Lauter tun
A lauter tun is the traditional vessel used for separation of the extracted wort. While the basic principle of its operation has remained the same since its first use, technological advances have led to better designed lauter tuns capable of quicker and more complete extraction of the sugars from the grain.
The false bottom in a lauter tun has thin (0.7 to 1.1 mm) slits to hold back the solids and allow liquids to pass through. The solids, not the false bottom, form a filtration medium and hold back small solids, allowing the otherwise cloudy mash to run out of the lauter tun as a clear liquid. The false bottom of a lauter tun is today made of wedge wire, which can provide a free-flow surface of up to 12% of the bottom of the tun.
The run off tubes should be evenly distributed across the bottom, with one tube servicing about 1 m² of area. Typically, these tubes have a wide, shallow cone around them to prevent compaction of the grain directly above the outlet. In the past, the run-off tubes flowed through swan-neck valves into a wort collection grant. While visually appealing, this system led to a lot of oxygen uptake. Such a system has mostly been replaced either by a central wort-collection vessel or the arrangement of outlet ports into concentric zones, with each zone having a ring-shaped collection pipe.
A good quality lauter tun has rotating rake arms with a central drive unit. Depending on the size of the lauter tun, there can be between two and six rake arms. Cutting blades hang from these arms. The blade is usually wavy and has a plough-like foot. Each blade has its own path around the tun and the whole rake assembly can be raised and lowered. Attached to each of these arms is a flap which can be raised and lowered for pushing the spent grains out of the tun. The brewer, or better yet an automated system, can raise and lower the rake arms depending on the turbidity (cloudiness) of the run-off, and the tightness of the grain bed, as measured by the pressure difference between the top and bottom of the grain bed.
There must be a system for introducing sparge water into the lauter tun. Most systems have a ring of spray heads that ensure an even and gentle introduction of the sparge water. The watering system should not beat down on the grain bed and form a channel.
Large breweries have self-closing inlets on the bottom of the tun through which the mash is transferred to the lauter tun, and one outlet, also on the bottom of the tun, into which the spent grains fall after lautering is complete. Craft breweries often have manways on the side of the mash tun for spent grain removal, which then must be helped along to a large extent by the brewer.
Some small breweries use a combination mash/lauter tun, in which the rake system cannot be implemented because the mixing mechanism for mashing is of higher importance. The stirring blades can be used as an ersatz rake, but typically they cannot be moved up and down, and would disturb the bed too much were they used deep in the grain bed.
Footnotes
  1. Audrey Ensminger, Foods & nutrition encyclopedia, Volume 1, page 188. CRC Press, 1994, ISBN 0849389801. Retrieved 2010-02-20. ↩
  2. Dan Rabin, Carl Forget, The dictionary of beer and brewing, page 180. Taylor & Francis, 1998, ISBN 1579580785. Retrieved 2010-02-20. ↩
  3. "Abdijbieren. Geestrijk erfgoed" by Jef Van den Steen ↩
  4. Bier brouwen ↩
  5. What is mashing? ↩
  6. Malting and Brewing Science: Volume I Malt and Sweet Wort, D. E. Briggs, James Shanks Hough, R. Stevens, Tom W. Young, Springer (1981), ISBN 0-412-16580-5 ↩
  7. Malts and malting - Google Books. books.google.co.uk. Retrieved 2010-07-09. ↩
  8. Malting and Brewing Science: Malt ... - Google Books. books.google.co.uk. Retrieved 2010-07-09. ↩
  9. Decoction Mashing brewery.org ↩
  10. Palmer, John (2006). How to Brew. Boulder, CO: Brewers Publications. pp. Chapter 17. ISBN 0-937381-88-8.↩