Thursday, October 10, 2013

English Cider

http://www.homebrewtalk.com/f81/grahams-english-cider-107152/

Ever since my last trip to the UK, I have fallen in love with a good dry English cider. It has become my goal ever sense to re-create a English-style cider using store-bought materials. After adding different forms of tannin and acid, using all sorts of ale yeasts to ferment the juice, and I think I have come up with a great recipe that pretty much anyone can do, getting a quaffable re-creation of a cider one could get across the pond. Finishes dry to off-dry, around 1.002, 6.4% abv. Taste is most comparable to the Samual Smith Organic Cider you can get here in the states.

Graham's English Cider
5 gallons Treetop (or equivalent) Apple Juice
4 black teabags (English or Irish Breakfast)
3 key limes (or one regular lime)
1 pack s-04 yeast
(yeast nutrients as needed)

Directions
Add juice of lime(s) to 3 cups of water, bring to a boil then turn off heat. Steep teabags for 7-10 mins, cool for a few mins then add to carboy. Add nutrients and juice into carboy with an aggressive pour to help aerate the juice. Add yeast, put an airlock on then place in a cool (60F-70F) environment.

Primary for one month, then rack to secondary, topping off with juice. Leave in secondary until crystal clear (usually 2-3 months or so from pitching) then bottle with 4oz priming sugar.

Takes about a month to carbonate, tastes good after 3 months, but just gets better with age. I usually start opening bottles about 5 months after pitching.

Just as a note, I've gotten into the habit of just starting a batch of this cider every time I brew using a bit of the same yeast as the beer, and have had great success with WLP005, WLP023, WLP026, WLP028, WLP037, WLP775 and nottingham, however these all seem to take longer to age and clear compared to the s-04, but are all slightly different in flavor profile, I'm sure any other english yeast would work great in this as well.

Wednesday, September 18, 2013

Lemon Lime Hefeweizen

All-Grain - Lemon-lime Hefe Weizen - Home Brew Forums Recipe
Type: AU Grain Yeast: White Labs Hefeweizen IV
Batch Size (Gallons): 6
Original Gravity: 1.051
Final Gravity: 1.01
IBTJ: 11.9
Boiling Tinte (Minntes): 6o
Color: 4.0
Primary Fermentation (# of Days & Temp): 3

Tasting Notes: Lemon-Lime in your face flavor....real easy to drink and drink and drink!
After brewing this beer several times and having other people brew it as well... .I can tell you this will be one of your favorite recipes!
All Grain .
6.251bs Pale Malt (2 Row) .
4lbs White Wheat Malt .
1lb Vienna Malt
Mash 158 for 45 minutes
0.25 Motueka Hops at 60 Minutes
0.25 Sorachi Ace 20 minutes .
0.25 Motueka Hops 20 minutes
0.25 Sorachi Ace 7 Minutes
0.50 Lime Zest 5 Minutes
White Labs Hefeweizen IV Ale Yeast .
5 Days Vigorous Fermentation .
After Vigorous Fermentation subsides, add 1.75L Simply Limeade .
****Ferment for a minimum of 3 weeks****

Monday, August 5, 2013

Heady Topper Clone Brew 4.0

http://www.homebrewtalk.com/f12/heady-topper-can-you-clone-390082/index135.html


The fermentation chamber has been cleared of high-temp-needy Saisons and it’s time to brew another Heady Topper clone. This one might be a winner, it’s really close. For this 5-gallon batch brewed on 5/4/2013, the grain bill was 86.8% Pearl, 3.8% Caramalt, 5.7% Torrified Wheat, and 3.7% Turbinado Sugar. Up to this point, I have used the following hop bill :

10ml of hop jizz @90 minutes = 107 IBUs
1 oz of Columbus (14% AA) + 0.5 ounces of Apollo (12.5%AA) @5 minutes
2 oz of Columbus(14% AA) + 1 ounce of Simcoe(13%AA) at flameout.

I turn on the chiller for about 5 minutes to get the wort down to 180 then I add:

1 ounce of Columbus
1 ounce of Simcoe
0.75 ounces of Amarillo
0.5 ounces of Apollo + 0.5 ounces of Centennial

I swirl the hops around with my immersion chiller every 5 minutes for a total of 30 minutes. After 30 minutes, turn on the chiller again and bring down to pitching temp of 68. By the time you get to 68, your last minute additions and whirlpool hops will have had about an hour of contact time with the wort and will be very aromatic.

While it’s too early, way too early, to render a final verdict, I got a very distinct Heady Topper aroma out of the bottom of the kettle after I’d filled up the carboy. I’m still not sure if it was the Apollo addition, the fresh batch of Columbus I used, or the new ratio of hops. Whatever it was it intrigued and excited me for what this brew will turn out like.
I will be fermenting this batch at 68 degrees with an insulated temperature probe taped to the carboy. I pitched 225ml of slurry harvested the 2nd week of April. Expected something like 200-250 billion cells to make it in there. After 3 days I rose the temperature to 71 degrees until day 14. I crashed down to 58 degrees and commenced the two-stage dry hop. This is the most accurate fermentation temperature schedule out there. There is no evidence that Heady Topper is fermented in the low 60s like reported elsewhere. 68-72-58.
Heady Topper Clone Attempt 4.0

Beersmith file for download
Beer XML file

Imperial IPA
Type: All Grain Date: 5/2/2013
Batch Size (fermenter): 5.00 gal
Boil Size: 6.47 gal
Boil Time: 90 min
End of Boil Volume 5.72 gal Brewhouse Efficiency: 75.00 %
Final Bottling Volume: 5.00 gal Est Mash Efficiency 77.7 %
Ingredients

Amt Name Type # %/IBU
11 lbs 8.0 oz Pearl Malt (2.4 SRM) Grain 1 86.8 %
8.0 oz Thomas Fawcett CaraMalt (12 SRM) Grain 2 3.8 %
12.0 oz Canada Malting Group White Wheat (3.5 SRM) Grain 3 5.7 %
8.0 oz Turbinado (10.0 SRM) Sugar 14 3.8 %
Hops

10ml Hopshot [3.45 %] – Boil 90.0 min Hop 4 117.8 IBUs
1.00 oz Columbus (Tomahawk) [14.00 %] – Boil 5.0 min Hop 5 8.9 IBUs
0.50 oz Apollo [12.50 %] – Boil 5.0 min Hop 6 4.0 IBUs
2.00 oz Columbus (Tomahawk) [14.00 %] – Boil 0.0 min Hop 7 0.0 IBUs
1.00 oz Simcoe [13.00 %] – Boil 0.0 min Hop 10 0.0 IBUs
1.00 oz Columbus (Tomahawk) [14.00 %] – Aroma Steep 30.0 min Hop 8 0.0 IBUs
1.00 oz Simcoe [13.00 %] – Aroma Steep 30.0 min Hop 9 0.0 IBUs
0.75 oz Amarillo Gold [8.50 %] – Aroma Steep 30.0 min Hop 11 0.0 IBUs
0.50 oz Centennial [10.50 %] – Aroma Steep 30.0 min Hop 13 0.0 IBUs
0.50 oz Apollo [12.50 %] – Aroma Steep 30.0 min Hop 12 0.0 IBUs
1.00 oz Columbus (Tomahawk) [14.00 %] – Dry Hop 8.0 Days Hop 16 0.0 IBUs
2.00 oz Simcoe [13.00 %] – Dry Hop 8.0 Days Hop 15 0.0 IBUs
1.00 oz Amarillo Gold [8.50 %] – Dry Hop 8.0 Days Hop 17 0.0 IBUs
1.00 oz Centennial [10.50 %] – Dry Hop 8.0 Days Hop 18 0.0 IBUs
0.50 oz Apollo [17.00 %] – Dry Hop 8.0 Days Hop 19 0.0 IBUs

Beer Profile
Est Original Gravity: 1.073 SG Measured Original Gravity: 1.073 SG
Est Final Gravity: 1.014 SG Measured Final Gravity: 1.010 SG
Estimated Alcohol by Vol: 7.8 % Actual Alcohol by Vol: 8.5 %
Bitterness: 130.7 IBUs Calories: 249.4 kcal/12oz
Est Color: 6.1 SRM
Yeast

It’s very important to use Conan yeast, the Alchemist’s proprietary yeast strain. It’s super unique, high attenuation, and gives a peachy aroma when treated right. Keep you eyes out for a new yeast YG001 Green Mountains Ale Yeast which has very similar characteristics. It goes on sale every Monday at 8PM EST/5PM PST, you can find it here: http://yeastgeek.com/product/yg001-green-mountains-ale/

Mash Profile
Mash Name: Single Infusion, Medium Body, Batch Sparge Total Grain Weight: 13 lbs 4.0 oz
Sparge Water: 4.00 gal Grain Temperature: 72.0 F
Sparge Temperature: 168.0 F Tun Temperature: 72.0 F
Adjust Temp for Equipment: TRUE Mash PH: 5.20
Name Description Step Temperature Step Time
Mash In Add 17.05 l of water at 163.5 F 150.0 F 60 min

Sparge Step: Drain mash tun, Batch sparge with 1 steps (4.00gal) of 168.0 F water
Mash Notes: Simple single infusion mash for use with most modern well modified grains (about 95% of the time).

* 5/6/2013- Main fermentation complete. No krausen. Liquid is creamy orange. Typical fermentation minus the Krausen.
*5/8/2013- Airlock activity slowed to 1 bubble every two seconds. A 1″ Krausen came up the night of 5/6/2013 and is back down to a 1/4 inch ring today. Smelling great in the ferm chamber.
* 5/9/2013- Took gravity reading. Sample is very peachy with noticeable Caramalt contribution similar to the Caravienne I was using before. The smell pre dryhop very much reminds me of the bottom of a can of Heady, after all the dryhop aroma has left the can.
You can see the yeast is still suspended. Gravity reading was 1.014 so I hope it’ll creep in to 1.010 over the next 2 weeks. If not I’ll lower mash temp to 149.

* 5/16/2013- After constructing my new CO2 wand I threw in half of the dry hop, stirred and roused with CO2. This half of the dry hop was 1 ounce of Simcoe, 0.75 ounces of Columbus, 0.5 ounces of Amarillo, 0.5 ounces of Centennial, and 0.25 ounces of Apollo.
Belpaire is offline

Wednesday, July 31, 2013

BeerSmith2 'Equipment Profile set-up


What figures should new users start with in their equipment profile?

Note: chiller-AUS also has information on equipment profile set-up here . 

By far the hardest aspect of BeerSmith2 for new all-grainers is working out what figures to use in their equipment profile and understanding the logic behind these figures. No software can instantly give you an understanding of the all-grain brewing process let alone the mathematics so a new user must be prepared to spend some time educating themselves.

This thread aims to get you started on this journey.

This thread will get your 'Equipment Profile' to a good starting point. A new user though will need to take many measurements over 5 or more brews before they start adjusting the  figures they end up with below. A single brew can teach you nothing about figures. The average of 5 brews can.

I will only be looking at some of the fields in 'Equipment Profile,' the ones I think are the hardest fields for the new user to understand and estimate. Details on the other fields can be found in the BeerSmith2 help file and video.

Let's Get Started

Firstly go to 'Profiles' and then click on 'Add Equip'. Now type in a name for the equipment profile - I am going to call this profile 'Sample Beginner Equipment Profile.'

Here are the fields that we will look at.

Bottling Volume
Fermenter Loss
Batch Volume
Loss to Trub and Chiller
Boil Off
Boil Time
Brewhouse Efficiency (and how it can be derived from 'Mash Efficiency')

Now let's start exploring and put in some figures.

Bottling Volume

This is how much beer you would like to end up with in your bottles and/or kegs. 5 gal or 18.93 L is a handy size for a lot of brewers so we will use this for our example and work our way up from there. You cannot type into this field as it is automatically calculated from the next two numbers. Once we type the next two numbers in you should see 5 gal or 18.93 L appear in this field.

Fermenter Loss

As beer ferments, quite a lot of sediment etc collects at the bottom of the fermenter. Most people underestimate this loss. In our profile we will allow some breathing space, however the upside is it will allow you to establish your real equipment losses faster and easier. It will also mean that you should be able to just transfer clear wort and beer rather than cloudy muck into your bottles/kegs. So, I am going to allow 0.5 gallons or 1.89 litres for this. Type this into the 'Fermenter Loss' field.

Batch Volume (Also known as 'Batch Size' in BeerSmith2.)

It is important to realise that this term means different things to different brewers and in different software. There is no standard international definition. In BeerSmith2 it is clearly defined as the volume you want to get into your fermenter. If you look at the Batch Volume field you will see it  reads 5 gal or 18.93 L as this is the default of BeerSmith2. As we want to end up with 5 gal or 18.93 L in our bottles we need to add in our 'Fermenter Loss' to work out our 'Batch Size.' So type in 5.5 gal or 20.82 L into the 'Batch Volume' field.

Loss to Trub and Chiller

At the end of an all-grain boil there will be what is known as 'kettle trub'. This consists of hop break and other types of solids and debris. It is regarded as best practice to avoid putting these solids into your fermenter as much as possible so we need to make an allowance for this. Some brewers use advanced trub management techniques to make this loss very low. Whirlpooling, hop socks and filters are ways of achieving this. Most new all-grainers make the mistake of under-estimating their losses to trub. These can be extremely high when no trub management techniques are used. I am going to allow for quite a large 'Loss to Trub and Chiller,' however in some cases including very hoppy brews, this loss to trub and chiller may not be high enough. Type in 1.25 gal or 4.73 L.

Boil Off

Boil off is the amount of liquid evaporated off between the start and the end of the boil. This can vary quite dramatically from brew to brew. For example brewing on a hot, dry, windy day will significantly increase boil-off so new brewers need to do several brews to become familiar with this.

Given the same atmospheric conditions etc, the main factor affecting boil off is the surface area of our pot/kettle. A while ago, I gathered some figures from a collection of brewers and wrote a formula that new brewers could use to at least take an educated guess at what their boil off would be, based on their kettle diameter.

I will show this calculation in the post that follows however it is done automatically for you in the attached spreadsheet called, 'BeerSmith2 Equipment Profile Set-Up Helper 1.3'. This spreadsheet allows for metric, US and English users. Sigurður Guðbrandsson has also written an online tool for us here. (Thanks Sig!) Typing in the diameter of your kettle and your boil time will give you your boil-off estimate.

For our example, I will assume we have a pot with a diameter of 40 cms (15.8 inches) and that we will do a 90 minute boil. Using either the attached spreadsheet or online tool, I can see that I need to type in 8.1 L or 2.14 gal into the 'Boil Off' Field.

Boil Time

As just mentioned, we are going to use a 90 minute boil in our profile. This is quite a good time for inexperienced brewers to use as it can solve some haze and other problems that can occur in rare circumstances in a 60 minute boil. If you prefer to do a shorter boil, for example 60 minutes, remember to change the 'Boil Off' field above to 5.38 L or 1.42 gal. For our example though let's type 90 into the 'Boil time' field.

Brewhouse Efficiency (and how it can be derived from 'Mash Efficiency')
Like 'batch size,' the word efficiency is very poorly used in the brewing world. There are actually many types of efficiencies. Some common ones are 'mash efficiency,' 'efficiency into boiler,' 'efficiency into kettle,' 'post-boil efficiency' 'efficiency into fermenter' and 'efficiency into packaging.'

While the above are well-defined, there is no internationally accepted definition of the terms, 'Brewhouse Efficiency' or 'Efficiency'. Once again, these terms often mean different things to different programs and different brewers. This can be very hard for the new all-grainer to get their head around.

When BeerSmith2 says 'Tot Efficiency' or, 'Brewhouse Efficiency,' it means 'efficiency into fermenter.' For example, our 'Brewhouse Efficiency', in the profile we are creating here, is going to be very low as we are 'wasting' a lot of wort with the high 'Loss to Trub and Chiller' figure we set above.

So, what should a new all-grainer do?

What we should do is first take an educated guess at our 'mash efficiency' which is the same as 'efficiency into boiler' which, in practicality, is also usually very close to 'post-boil efficiency'. Because 'mash efficiency' does not account for 'Loss to Trub and Chiller,' there is far less variation from one brewer to another who use the same all-grain method.

Like boil-off, until we get several brews under our belt, there is no way we can predict what our mash efficiency will be. We have to make an educated guess and go from there. I suggest that the new all-grainer starts with one of the following 'mash efficiencies'...

High Efficiency Equipment = 85% 'Mash Efficiency' (e.g. fly sparging)
Medium Efficiency Equipment = 80% 'Mash Efficiency' (e.g. BIAB)
Low Efficiency Equipment = 75% 'Mash Efficiency' (e.g. batch sparging)

Please note that a high mash efficiency is nothing to be proud of and does not mean you will make better beer. All methods will produce excellent beer and mash efficiency has no correlation with this. Working off these figures though, gives you a starting point.

BeerSmith2 however requires us to input 'Brewhouse Efficiency.' So, how do we convert 'mash efficiency' to 'Brewhouse Efficiency'?

The calculation is actually quite simple and once again, I will write it in the post that follows. It is the same calculation as used for 'mash efficiency' however 'Loss to Trub and Chiller' are deducted from the volume. The calculation is done automatically for you in the attached spreadsheet or online tool.

For our example, I will assume we are going to BIAB so I will type 80 into the 'Mash Efficiency' field and 4.73 L or 1.25 gal into the 'Loss to Trub and Chiller' field of the spreadsheet or online tool. 

This tells me that my 'Brewhouse Efficiency' should be 65.2%. So type 65.2 into the 'Brewhouse Efficiency' field of your BeerSmith2 Equipment Profile.

Finalising the Profile

Watch Brad's video here and read the BeerSmith help file on 'Equipment Profile' set-up . Make any final changes to figures in the profile and click 'OK'.

If you have used the same figures as in this example then your profile will look identical to the one I have attached here called, 'Sample Beginner Equipment Profile'.

What to Do Now

Do not change the figures in this profile until you have done four or five brews or are positive you have made a basic error (see 'A Warning' below). As mentioned above, a single brew will tell you nothing. For example, if you scored a very high or low 'mash efficiency' how do you know it was not due to one of the 7 reasons listed here? If your boil off was very high, was this due to hot, windy, dry conditions on your brew day or maybe even incorrect volume measurements?

A new brewer must take as many measurements as possible over at least 5 brews to learn their equipment. Here are four that you can do on each brew. Each reading helps confirm the others.

1. Mash Efficiency: Measure volume and gravity at the start of boil. (Ensure wort is well-mixed. Cover your hot wort sample in wrap to avoid evaporation while it cools).

2. Post-Boil Efficiency: As above but taken at the end of the boil. This should on average be very close to your Mash Efficiency. The post-boil volume figure you collect here will also enable you to calculate and confirm your boil-off.

3. Brewhouse Efficiency: Measure volume and gravity of wort in the fermenter.

4. Loss to Trub and Chiller: Measure the volume that remains in your kettle (and chiller if counter-flow) after transfer to fermenter. Typing this and your Brewhouse Efficiency into the attached spreadsheet, online tool or the actual fields of BeerSmith2 will help confirm your Mash Efficiency.

Doing all these measurements gives you practice at taking readings and will make you realise faster that variances between readings and single brews are not uncommon. At the end of these five brews you will also have excellent base figures from which to create your own equipment profile. 

A Warning  

Changing things in your Equipment Profile without having a reliable collection of average figures will only cause you trouble. For example, if you decide to decrease your 'Loss to Trub and Chiller' figure, do you realise after studying the above that you must also increase your 'Brewhouse Efficiency' figure because your system now will have a higher 'efficiency into fermenter'?

Playing around with volume or 'Brewhouse Efficiency' figures within a recipe is also very dangerous for an inexperienced user so be very careful! Always make a copy of a recipe before you start playing.

The good news is that if you have read and really studied the above rather than skimmed through it, you will be well on the road to driving BeerSmith2 safely and letting it take you places that 'skimmers' will never reach or only reach by a possibly painful accident :argh:.

I'm happy to answer questions in this thread as long as I am sure you haven't skimmed ;).

Estimating Boil-Off from the Kettle Diameter
In metric, the estimate is...

Litres per hour boiled off = pi*(diameter of kettle in cms/2)*(diameter of kettle in cms/2)*0.00428.

So, for the 40 cm pot we used in our sample profile above, the calculation was...

Litres per hour boiled off = 3.14159*40/2*40/2*0.00428 = 5.38 L/Hr

Deriving 'Brewhouse Efficiency' from 'Mash Efficiency'
The formula is...

BeerSmith2 'Brewhouse Efficiency' = 'Mash Efficiency'-('Loss to Trub and Chiller'/('Loss to Trub and Chiller'+'Batch Volume')*'Mash Efficiency')

So, for the sample profile used in the post above, the calculations was...

'Brewhouse Efficiency' = 80-(4.73/(4.73+20.82)*80=65.2%
Cheers,
Pat

Thursday, July 4, 2013

Easy Ginger Ale

From: http://www.homebrewtalk.com/f171/easy-ginger-ale-208888/
http://biology.clc.uc.edu/fankhauser/cheese/ginger_ale_ag0.htm

1 cup cane (table) sugar [sucrose]
 Freshly grated ginger root (1 1/2-2 tablespoons) 
Juice of one lemon
 1/4 teaspoon yeast- I like Red Star Champagne yeast cold fresh pure water- use RO, spring water or something that tastes good!

This recipe makes a 2L soda bottle of ginger ale, or you can use individual bottles. Sanitize all equipment with a food-safe sanitizer. I like Star-san.

Grate the ginger, using fresh ginger root.
Add 1 cup sugar to the 2 liter bottle with a dry funnel. (Leave the funnel in place until you are ready to cap the bottle.) If you want to use individual bottles, you can mix up the ingredients in a pitcher, and then pour into the bottles.
Sometimes I let the ingredients sit overnight in the pitcher (except for the yeast) and then strain into the bottle the next day, and add the yeast at that time. This helps you not to have any "floaties" in the soda!

NOTE: Many have asked about bottling ginger ale in glass bottles. I do not recommend it because ginger ale is a very aggressive fermenter, producing high pressure fairly rapidly. Plastic bottles can be felt to judge pressure. Glass cannot. Tardy refrigeration can lead to explosions. Exploding plastic bottles are messy. Exploding glass botles are dangerous... 

Measure out 1/4th teaspoon fresh yeast.
Add yeast through funnel into the bottle, shake to disperse the yeast grains into the sugar granules.
Add the grated ginger to a cup measure.
Juice a whole lemon. (Lemon is optional, giving a little tartness to the ginger ale. Try it both ways to see which you prefer. I like them both.)
Add the juice of a whole lemon to the grated ginger.
Stir the lemon juice and grated ginger to form a slurry. A
dd the slurry of lemon juice and grated ginger to the bottle. (It may stick in the funnel.
Don't worry, the next step will wash it into the bottle.) Rinse containers with fresh clean water.
Add the rinsings to the bottle, cap and shake to distribute. Fill the bottle to the neck with fresh cool clean water, leaving about an inch of head space, securely screw cap down to seal. Invert repeatedly to thoroughly dissolve sugar. (The ginger root will not dissolve, of course.)

Place in a warm location for 24 to 48 hours. (Do not leave at room temperature longer than necessary to feel "hard." The excess pressure may cause an eruption when you open it, or even explode the bottle! Test to see if carbonation is complete by squeezing the bottle forcefully with your thumb. If it's not rock hard, it's not ready! Once the bottle feels hard to a forceful squeeze, usually only 24-48 hours, place in the refrigerator.

Before opening, refrigerate at least overnight to thoroughly chill. Crack the lid of the thoroughly chilled ginger ale just a little to release the pressure slowly. You do not want a ginger ale fountain!

NOTE: Do not leave the finished ginger ale in a warm place any longer than the time it takes for the bottle to feel hard. Leaving it at room temperature longer than two days, especially in the summer when the temperature is high, can generate enough pressure to explode the bottle! Once it is thoroughly chilled, there is little danger of explosion. Filter the ginger ale through a strainer if you find floating pieces of ginger objectionable. These are found in the first glass or two poured, and, since most of the ginger sinks to the bottom, the last glass or so may require filtering too. Rinse the bottle out immediately after serving the last of the batch.

For kegging, mix up the ingredients in a pitcher, minus the yeast. You can double/triple/etc the recipe. Carb up at 30 psi at 40 degrees, and use a LONG line to dispense! I have experimented with boiling the water/sugar/ginger water, and it was a far more subtle "ginger" bite type of soda. I've used more ginger, too, and liked it better. But the amount in the recipe is a good place to start if you don't know if you love ginger or not!

Monday, June 3, 2013

Rochefort 8 clone

The winning beer was made exactly following the recipe below. 
Fermentation temperature was 21-23C. 

For 10 liters, 1.080 OG, 32 IBU, 70 EBC :
Maltbill
%            Amount               Malt
70.4        2375 grams         Pilsnermalt (Belgian)
11.1        375 grams            Caramunich 120 EBC
1.5          50 grams              Carafa special dehusked 800 EBC
3.7          125 grams            Special "B"
3.7          125 grams            Flaked Corn
9.6          325 grams            Dark Candysugar
Hops (flowers) & Spices
Styrian Goldings               23 grams 4.2%  75 minutes
Hallertau Hersbrucker    10 grams 3.5%  30 minutes
Hallertau Hersbrucker    5 grams 3.5%     5 minutes
Coreanderseed crushed               5 grams               5 minutes
Yeast: Wyeast 1762 Belgian Abbey II or recultered from a bottle of
Rochefort. The winning recipe used the Wyeast.

Mashing: 3 liters per kg malt. Flaked corn boiled separately before adding
to the mash.

60-62C  30 minutes
68C         60 minutes
75C         5 minutes

Sparging with water at 78C

A promash recipe file is available at the following location:
http://www.geocities.com/iluvhops/brouwsel/rochefort8.html ,
which will make life easier for all you non-metric brewers. At this
location you will also find some extra info (references etc.) together with
a copy of this post.

Below, I listed some findings based upon variations in the recipes. Of
course, this wasn't set up in a randomized, replicated fashion, but I think
it might be of interest nonetheless:

1) The use of chocolate malt instead of the dehusked Carafa resulted in a bit of a licorice taste or even a bit of a burned taste.
2) If you can't get Carafa Dehusked, look for a debittered/dehusked dark chocolate/Black malt. It can also be had from Weyermann
3)  The use of the original yeast instead of the Wyeast didn't change much in the tasting profile. Which makes sense, because they're said to be similar.
4) The second placed beer (Theo Verschoor) was fermented at 28C, which resulted in a very strong banana and fruit aroma!
5) The third placed beer (Edwin Hoogedoorn) tasted very close to the second, but
had a less pronounced aroma, because of a lower temperature fermentation.
6)  To get a color more resembling the original, it is suggested to slightly bring down the amount of Carafa.
7)  Some beers had problems during bottle-conditioning. When bottling make sure to do it in time or to add a healthy yeast.
8)  Samples with added (non-Rochefort) yeast for conditioning did not
seem to result in a different taste.

All in all a very cool experience, which is to be repeated by a joint Orval
cloning contest. A recipe of which has already been agreed upon. :-)

Take care,

Herman Holtrop

The Pious - Westvleteren 12 style quad

The Pious Traditional - I like this better than the New World.


Recipe Specifications
--------------------------
Batch Size: 5.50 gal
Boil Size: 8.27 gal
Estimated OG: 1.092 SG
Estimated Color: 33.8 SRM
Estimated IBU: 35.2 IBU
Brewhouse Efficiency: 70.00 %
Boil Time: 90 Minutes

Ingredients:
------------
Amount Item Type % or IBU
8.00 lb Pale Malt (2 Row) Bel (3.0 SRM) Grain 42.11 %
8.00 lb Pilsner (2 Row) Bel (2.0 SRM) Grain 42.11 %
1.00 oz Northern Brewer [8.50 %] (90 min) Hops 25.7 IBU
1.00 oz Styrian Goldings [4.10 %] (20 min) Hops 7.0 IBU
0.50 oz Hallertauer Hersbrucker [2.80 %] (20 min)Hops 2.4 IBU
3.00 lb Dark 2 Belgian Candi Syrup (160.0 SRM) Sugar 15.79 %
1 Pkgs Abbey Ale (White Labs #WLP530) Yeast-Ale
1lbs sugar added to beginning of boil, 1lbs added to last 5, 1lbs added in secondary.

Mash Schedule: Decoction Mash, Double
Total Grain Weight: 16.00 lb
----------------------------
Decoction Mash, Double
Step Time Name Description Step Temp
10 min Protein Rest Add 32.00 qt of water at 137.5 F 132.0 F
30 min Saccharification Decoct 8.79 qt of mash and boil it 151.0 F
30 min Saccharification Decoct 4.85 qt of mash and boil it 159.0 F

Same yeast is used in both, and same fermentation schedule is used in both. Chill the wort down to 65f, pitch and let it self rise to about 82-83f and try to hold it there. The yeast will keep the temp there for about 5 days when fermentation is about 80% done (about 1.018) and start to chill down to 65f until you hit terminal gravity at 1.012 which should take 2 days. After this rack off into a secondary (I did kegs for both as I keg conditioned) and chill to 50f for 7 weeks, then carb however you want.

http://www.homebrewtalk.com/f73/pious-westvleteren-12-style-quad-multiple-147815/

Wednesday, April 24, 2013

Revvy's Belgian Blonde (Leffe Clone)

Recipe Type: All Grain

Yeast: WLP530 White Labs Abbey Ale
Yeast Starter: Yes
Batch Size (Gallons): 5 gallons
Original Gravity: 1.068 (est)
Final Gravity: 1.010
IBU: 30.4
Boiling Time (Minutes): 90
Color: 6.3 SRMs
Primary Fermentation (# of Days & Temp): 30
Tasting Notes: Tastes really close to Leffe Blonde. Same crispness and grainy character.

Category 18a Belgian Blonde. 

This is MY INTERPRETATION of a clone of Leffe Blonde that I came up with for AHC big brew day in May. It was created by my usual method of looking at other Leffe Clones recipes, starting by overlapping the similarities, and tweaking til I achieved over several batches the taste profile I was looking for. It ws created by the same methods described in the Introduction to create clones/de-engineering in BYO's 150 clone brew recipes. Then repeatedly it was sampled alongside the original by several brewer friends and even a couple bjcp judges informally. All felt this final version was a tasty approximation of the original.

I find that Leffe, has a nice "graininess" that has really come out nicely in this recipe. 

I just discovered 2 bottles in the back of my brew closet (5 months later) and it is delicious. Even better I think now, then when it was "fresh" That's why I have decided to actually let this recipe go, and quit tweaking it. 

Revvy's Blonde
Brew Type: All Grain Date: 4/25/2010 
Style: Belgian Blond Ale Brewer: Michael 
Batch Size: 5.00 gal 
Boil Volume: 6.41 gal 
Boil Time: 90 min (Pilsner malts)


Ingredients Amount Item Type % or IBU 
9 lbs 13.0 oz Pilsner (2 Row) Bel (2.0 SRM) Grain 81.61 % 
1 lbs Munich Malt (9.0 SRM) Grain 8.32 % 
5.3 oz Biscuit Malt (23.0 SRM) Grain 2.75 % 
3.5 oz Melanoiden Malt (20.0 SRM) Grain 1.83 % 

1.36 oz Styrian Goldings [5.40 %] (60 min) Hops 23.4 IBU 
0.71 oz Saaz [4.00 %] (30 min) Hops 7.0 IBU 

10.6 oz Sugar, Table (Last 15 minutes of boil) (1.0 SRM) Sugar 5.49 % 

1 Pkgs Abbey Ale (White Labs #WLP530) Yeast-Ale

Mash In: Add 14.20 qt of water at 178.4 F 
Hold mash at 158.0 F for 45 min 

Sparge with 4.47 gal of 168.0 F water. 

Add water to achieve boil volume of 6.41 gal 

Estimated Pre-boil Gravity is: 1.058 SG with all grains/extracts added.

Note This is a great Belgian Base recipe that you can add fruit to if your are inclined. it can be a great panty dropper for anywomen who may like sweet beers.

You can rack it to a seondary with whatever fruit you like. Peaches, Mango, Strawberry, whatever works for you. You can use frozen, fresh, canned or even extract. 

I've done it with frozen peaches. 

If you want some extra sweetness to pep up your fruit, either add 1/2 pound (or more) of lactose in the boil, or even along with your priming sugar at bottling time. Just dillute it along with your priming sugar in 2 cups of water.

Enjoy!


http://www.homebrewtalk.com/f71/revvys-belgian-blonde-leffe-clone-202852/

Friday, April 19, 2013

Yeast Washing

http://www.homebrewtalk.com/f163/yeast-washing-illustrated-41768/

Yeast Washing Illustrated


It seems to me that there have been quite a few inquiries about yeast washing lately, so since I was racking/washing today, I grabbed the digital camera to illustrate one way of doing it. I have had great success with this method, so I thought I'd share. Here goes:


The only materials that I use besides regular racking equipment is this:
4 pint sized Mason jars w/lids
1 larger container for extra water
1 kitchen tongs
My old boiling kettle from my original brewing kit.





I put all the stuff- lids and all- in the pot and add enough water to cover it:




Boil it for about 20 minutes or so. This will sanitize everything as well as get rid of any oxygen in the water, so the yeasties will take a nice long nap. Then remove the jars and lids with the tongs, keeping them full of water.





Cover all the jars and let cool in the fridge for several hours, or maybe overnight.

__________________
Rack your beer as usual........







Pour the water from the jars into the carboy







And give it a good swirl.








Let it sit for 20 minutes or so. This is what it will look like. Notice the stuff at the bottom starting to settle out.


I like to sThen, trying not to disturb the stuff at the bottom, fill up the larger jar that you boiled. If some of the stuff from the bottom gets in, it's not the end of the world.






Let this jar settle for 20 minutes or so, too. You'll notice some more stuff settling to the bottom again.





Then, again being careful not to disturb the stuff on the bottom, fill up the small Mason jars. Fill them all the way up. 

The four on the left are the ones I did today. the one on the right is one that I did last February. It's just there to show the final product.

All that's left to do is label the jars and put them in the fridge. Then when it's time to make a starter, you just pull one out, let it warm to room temp, and decant most of the liquid out of the jar, give the rest a good shake, and pitch it into your starter..




queeze the nickle until the buffalo craps-mt rob