Wednesday, April 24, 2013

Revvy's Belgian Blonde (Leffe Clone)

Recipe Type: All Grain

Yeast: WLP530 White Labs Abbey Ale
Yeast Starter: Yes
Batch Size (Gallons): 5 gallons
Original Gravity: 1.068 (est)
Final Gravity: 1.010
IBU: 30.4
Boiling Time (Minutes): 90
Color: 6.3 SRMs
Primary Fermentation (# of Days & Temp): 30
Tasting Notes: Tastes really close to Leffe Blonde. Same crispness and grainy character.

Category 18a Belgian Blonde. 

This is MY INTERPRETATION of a clone of Leffe Blonde that I came up with for AHC big brew day in May. It was created by my usual method of looking at other Leffe Clones recipes, starting by overlapping the similarities, and tweaking til I achieved over several batches the taste profile I was looking for. It ws created by the same methods described in the Introduction to create clones/de-engineering in BYO's 150 clone brew recipes. Then repeatedly it was sampled alongside the original by several brewer friends and even a couple bjcp judges informally. All felt this final version was a tasty approximation of the original.

I find that Leffe, has a nice "graininess" that has really come out nicely in this recipe. 

I just discovered 2 bottles in the back of my brew closet (5 months later) and it is delicious. Even better I think now, then when it was "fresh" That's why I have decided to actually let this recipe go, and quit tweaking it. 

Revvy's Blonde
Brew Type: All Grain Date: 4/25/2010 
Style: Belgian Blond Ale Brewer: Michael 
Batch Size: 5.00 gal 
Boil Volume: 6.41 gal 
Boil Time: 90 min (Pilsner malts)


Ingredients Amount Item Type % or IBU 
9 lbs 13.0 oz Pilsner (2 Row) Bel (2.0 SRM) Grain 81.61 % 
1 lbs Munich Malt (9.0 SRM) Grain 8.32 % 
5.3 oz Biscuit Malt (23.0 SRM) Grain 2.75 % 
3.5 oz Melanoiden Malt (20.0 SRM) Grain 1.83 % 

1.36 oz Styrian Goldings [5.40 %] (60 min) Hops 23.4 IBU 
0.71 oz Saaz [4.00 %] (30 min) Hops 7.0 IBU 

10.6 oz Sugar, Table (Last 15 minutes of boil) (1.0 SRM) Sugar 5.49 % 

1 Pkgs Abbey Ale (White Labs #WLP530) Yeast-Ale

Mash In: Add 14.20 qt of water at 178.4 F 
Hold mash at 158.0 F for 45 min 

Sparge with 4.47 gal of 168.0 F water. 

Add water to achieve boil volume of 6.41 gal 

Estimated Pre-boil Gravity is: 1.058 SG with all grains/extracts added.

Note This is a great Belgian Base recipe that you can add fruit to if your are inclined. it can be a great panty dropper for anywomen who may like sweet beers.

You can rack it to a seondary with whatever fruit you like. Peaches, Mango, Strawberry, whatever works for you. You can use frozen, fresh, canned or even extract. 

I've done it with frozen peaches. 

If you want some extra sweetness to pep up your fruit, either add 1/2 pound (or more) of lactose in the boil, or even along with your priming sugar at bottling time. Just dillute it along with your priming sugar in 2 cups of water.

Enjoy!


http://www.homebrewtalk.com/f71/revvys-belgian-blonde-leffe-clone-202852/

Friday, April 19, 2013

Yeast Washing

http://www.homebrewtalk.com/f163/yeast-washing-illustrated-41768/

Yeast Washing Illustrated


It seems to me that there have been quite a few inquiries about yeast washing lately, so since I was racking/washing today, I grabbed the digital camera to illustrate one way of doing it. I have had great success with this method, so I thought I'd share. Here goes:


The only materials that I use besides regular racking equipment is this:
4 pint sized Mason jars w/lids
1 larger container for extra water
1 kitchen tongs
My old boiling kettle from my original brewing kit.





I put all the stuff- lids and all- in the pot and add enough water to cover it:




Boil it for about 20 minutes or so. This will sanitize everything as well as get rid of any oxygen in the water, so the yeasties will take a nice long nap. Then remove the jars and lids with the tongs, keeping them full of water.





Cover all the jars and let cool in the fridge for several hours, or maybe overnight.

__________________
Rack your beer as usual........







Pour the water from the jars into the carboy







And give it a good swirl.








Let it sit for 20 minutes or so. This is what it will look like. Notice the stuff at the bottom starting to settle out.


I like to sThen, trying not to disturb the stuff at the bottom, fill up the larger jar that you boiled. If some of the stuff from the bottom gets in, it's not the end of the world.






Let this jar settle for 20 minutes or so, too. You'll notice some more stuff settling to the bottom again.





Then, again being careful not to disturb the stuff on the bottom, fill up the small Mason jars. Fill them all the way up. 

The four on the left are the ones I did today. the one on the right is one that I did last February. It's just there to show the final product.

All that's left to do is label the jars and put them in the fridge. Then when it's time to make a starter, you just pull one out, let it warm to room temp, and decant most of the liquid out of the jar, give the rest a good shake, and pitch it into your starter..




queeze the nickle until the buffalo craps-mt rob

Wednesday, April 3, 2013

Farm and freeze yeast

There’s some information out there about freezing yeast, but I’m not sure how many people are actually doing it. I’ve read a lot of posts about yeast washing and harvesting from ferementors so I thought I’d do a pitch (no pun intended) on yeast farming/freezing as an alternative.

Freezing yeast is actually quite simple. You mix water, glycerine (glycerol), and yeast slurry together and throw it in the freezer. That’s all there is to it. Glycerine is the magic ingredient that protects the yeast during the freeze. The yeast will remain vaible like this for quite a long time. I’ve brought up yeast that was almost 2 years old and brewed with it. So here’s my pitch.

The number one reason that I freeze yeast is for convenience. Smack packs, vials, slurry in a mason jar all loose viability over time and eventually die while sitting in the fridge. Dry yeast lasts a lot longer but will also lose viability. A frozen jar of yeast has a much longer shelf life. This means you can brew whenever you want (with a little planning) and never have to worry about available, healthy yeast.

Another benefit is cost. It ends up costing me about the same price as a pack of dry yeast (or a little less) for a jar of frozen liquid yeast and that’s after pitching to a 5-gallon batch of beer.

The process 

There are a couple of different approaches that you can take. The main thing is making sure you use enough glycerine. Unfortunately, there is no set number out there on how much glycerine to use. I use a 35% weight by volume solution. Others report using anywhere from 15% to 50% or over. Some like to add so much glycerine that the mixture does not actually freeze at all. Bottom line, pick what you think is best and run with it. If it works, continue on. 

What glycerine to use?
You want to use food grade vegetable glycerine. I get mine from Nutrition Geeks. The brand I get is “NOW.” It’s made in the United States. Be careful and don’t buy glycerine made in China because there have been reports of the Chineese selling Ethylene Glycol (antifreeze) and passing it off as glycerine. The two compounds have similar properties except Ethylene Glycol will kill you and glycerine won’t. 

How much yeast to freeze? 

Most people I’ve read about out there are freezing small portions of yeast in vials or something similar. I like to freeze estimated portions of 100 billion cells. This way I have more viable cells after the freeze and can start with a larger starter instead of having to do small step ups. 

As always, there is more than one way to skin a cat, but here’s how I do my process.

I like Wyeast so I always start with an activator smack pack. You can use whatever yeast you want. I buy one smack pack of every yeast strain I plan to use and then farm enough yeast of each to last me for about a year or a little over. I use the Wyeast pitching rate calculator, but you can pick the calculator of your choice (I know a lot of people like Mr. Malty). I make up an appropriately sized starter in steps so that the estimated final cell count is ~500 billion. I setlle out the yeast, siphon off the starter beer and add enough glycerine/water solution to bring the volume up to 500 milliliters. Then I split the yeast into 5 equal portions and refridgerate them for 48 hours before freezing. If I want more jars than that of a particular strain I will take one of the portions and put it back through the process. You can do this over and over again until you have as much yeast as you want. 

A few things that will help

A deep freezer. You want your yeast to remain frozen without the temperature fluctuating. It will have a longer shelf life this way. The best thing for this is a deep freezer. I like to store mine at the bottom of my chest freezer buried under a bunch of food. You don’t want to put the yeast in a self-defrosting freezer (like your refridgerator freezer). Self-defrosting freezers warm up once in a while and this is how they defrost. You don’t want your yeast warming and cooling all the time. If you don’t have a deep freeze, you can get around this by putting the frozen yeast in a small cooler with some ice packs and storing the whole cooler in the freezer. Freeze the yeast first and then throw the cooler in on the mix. I’ve read reports of this working well for folks but I’ve never done it myself.

A pressure cooker. I like to sterilize what materials that I can by pressure canning them. After all, it’s very important to practice excellent sanitation when farming yeast. The yeast has a long way to go before it gets to your prized wort and contamination from the start will have ample opportunity to magnify along the way. I pressure my starter wort, glycerine solution and the jars that I freeze the yeast in. It’s also more convenient this way because you can make up a bunch of this stuff all at one time and not have to worry about boiling/cooling/sanitizing every step of the way. I pressure everything at 15 psi for 15 minutes. For my freezer jars, I use 4 oz jelly jars. They hold about 120 milliters. I fill them up with tap water and pressure them. When it’s time to freeze yeast I pop the seal, dump the water and fill. Put the lid back on and tighten down the ring nice and snug. If you don’t have a pressure cooker, don’t fret, you could still do this. You would just have to boil and cool as usual and soak your jars in star san or something before filling. 

A stir plate. You can grow a lot more yeast a lot quicker and with less wort with a stir plate. However, a simple starter would work just fine as long as you make one big enough to hit your target cell count. What this means is that you will probably have to make more starters to get the same job done.

Make sure you freeze healthy yeast. I go the extra mile when I’m farming yeast to be frozen. I make sure the yeast have plenty of nutrients and give shots of pure oxygen at every wort addition. When the starter is done I settle out the yeast as fast as possible and refridgerate for 48 hours before freezing. I want to make sure that the yeast have healthy cell walls and a full belly of reserves before I freeze.

How to mix up your glycerine solution. I do mine in % wieght by volume. Here is the equation:
Concentration Solute (W/V %) = mass of solute in g / total volume of solution in milliliters. The density (mass of solute) of glycerine is 1.261 grams per milliliter.

To figure out how much glycerine you need, use the following equation:

(Desired % w/v (V)/1.261) = X ml Glycerine. Where V equals your total planned volume. 

Say you want to mix up 1 pint of 35 % w/v glycerine solution. 1 pint equals ~ 473 milliliters.

The math goes as follow. (0.35(473)/1.261) = 131 milliliters of glycerine rounded off. So, put 131 ml of glycerine in a pint jar and fill the rest of the way up with water. It helps to shake the jars so that glycerine dissolves better.


Thawing the yeast and brewing with it. (beer)

Ahh, the fruits of your labor. Thaw the yeast as quickly as possible with a water bath and pitch strait into a starter. It appears that viability after the freeze is on the low side (around 25%). Again, I freeze an estimated 100 billion cells. (Beer) When I thaw out a jar I use the Wyeast pitch rate calculator, select the propagator pack and then make an appropriately sized starter for the gravity beer that I’m brewing. Since propagators have 25 billion cells this works out nicely since 25 billion cells should make it through the freeze. Sometimes the frozen yeast exhibit an unusually long lag time on the first step of a starter. This is likely due to a low viable cell count. After the first step is complete, the yeast chew through whatever I throw at em in 12 hours or less. At any rate, once the starter gets going, the yeast act as normal as ever, so be patient your first couple times doing this and don’t be alarmed by an extended lag time on the first step. I recently updated the orginal post to include some process changes. I made the edits in red. I will be getting some lab equipment in the near future and running some tests on cell counts and viability after the freeze. As soon as I have some consistent results I will be sure to post them and update the post accordingly. 

Well, there you have it. If you decide to give this a try, I think you’ll find farming yeast and freezing it to be very convenient, cost effective, and relatively easy to accomplish. Anyone who makes yeast starters on a regular basis can do it. You’ll always have ample yeast on hand to brew with and you’ll never have to wash yeast again. For further reading I’ve posted some sources at the bottom.


Cheers



http://www.homebrewtalk.com/f13/guide-making-frozen-yeast-bank-35891/

http://www.homebrewtalk.com/f128/glycerin-water-ratio-freezing-yeast-215319/

http://www.dow.com/glycerine/resources/freezept.htm

http://www.schwedhelm.net/brew/yeast_harv_freeze.html

http://www.bodensatz.com/staticpages/index.php?page=yeast-culture-FAQ

http://maltosefalcons.com/tech/yeast-propagation-and-maintenance-principles-and-practices